The Xcel-Wobbler™ uses Senninger’s off-center rotary-action technology. It provides an extremely uniform and instantaneous application pattern over a large area at lower pressures, and with very low evaporative loss.

Senninger® has improved on the i-Wob® UP3® design with the next generation i-Wob®2 for center pivot irrigation. Featuring a protective shroud that doubles as a nozzle carrier, the new i-Wob2 is capable of better withstanding harsh operating conditions. Senninger Wobbler® sprinklers are recognized across the globe for their ability to spread water in a highly uniform pattern resistant to wind-drift and evaporation.

Senninger® mini-Wobblers provide instantaneous and uniform coverage over large diameters.

Senninger’s upright and inverted Micro-Sprinklers, provide outstanding performance to low volume irrigation.

Constructed from non-corrosive UV-resistant thermoplastic for a longer life.

The UP3® Dual Nozzle Carrier lets irrigators easily switch between flow rates without having to carry nozzles or tools into the field.

To access the secondary nozzle, pinch and pull the nozzle from the applicator, flip the carrier over and click in the secondary nozzle. The carrier is marked to indicate high and low flow nozzles. When installed in the applicator, if HIGH is visible on the carrier, then the lower flow nozzle in in use. If LOW is visible on the carrier, the higher flow nozzle is in use.

Designed to be used instead of a standard barb x threaded fitting, this device carries two additional UP3® nozzles. Just pinch and pull to remove nozzles and place and click to reinstall. Nozzles are easily identifiable with numbers on the ears. The larger the number, the higher the flow.

The dial shut-off knob makes changing or cleaning sprinklers and spray nozzles easy while the system is still operating.

Provides a quick and easy check of end-of-system pressure.

Pressure gauges accurately monitor system pressure.